BTC BCE5232IB Bedienungsanleitung

Dual Digital Storage Drive CD-RW 5232IB User’s Manual

CD-RW 5232IB 6 Driver Installation For the CD-RW Drive For the CD-RW drive itself of CD-RW 5232IB, it is an IDE device supporting Plug & Pla

CD-RW 5232IB 7

CD-RW 5232IB 8 Windows ME/XP Since Windows ME and XP already have USB Mass Storage support, the card reader can be detected and work fine withou

CD-RW 5232IB 9Software Installation The bundled mastering software gives you the complete solution for making audio/data CDs. With the user-f

CD-RW 5232IB 10 CONNECTION & OPERATION Front Panel 1. A-Type USB Extension Port This USB port is Plug-and-Play Ready. Just plug your USB dev

CD-RW 5232IB 115. Emergency Eject Hole When the Close/Eject button doesn’t work properly and the disc tray can’t be opened, you can insert a

CD-RW 5232IB 12 Rear View 23 456 1. Digital Audio Output Connector If your sound card has a digital audio IEC958 format connector, you can connec

CD-RW 5232IB 136. USB Cable Connect the USB cable to the USB connector on the motherboard. The red wire of the cable needs to be plugged in

CD-RW 5232IB 14 TECHNICAL DATA Interface CD-RW Drive: EIDE Card Reader: USB 2.0 Form factor 5.25" Half Height Writing speed

CD-RW 5232IB 15 Access time 90ms at ⅓ stroke(52X CD-ROM) 180ms at full stroke(52X CD-ROM) 99ms at ⅓ stroke (32X CD-RW) 200ms a

DANGER INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM VORSICHT INSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNE

CD-RW 5232IB 16 Environment Temperature Operating 5°C to 45°C Non-operating -20°C to 45°C Humidity Operating 8% ~ 80%RH Non-operating

3100552210 Version 1.0 Jan. 2004

FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device m

Table of Contents INTRODUCTION 1 SYSTEM REQUIREMENTS 2 PACKAGE CONTENTS 2 INSTALLATION 3 HOST INTERFACE CONNECTIONS 3 HARDWARE INSTALLATION 4 DRIVER

CD-RW 5232IB 1INTRODUCTION Thank you for the purchase of CD-RW 5232IB, a perfect and compact dual digital storage drive with the combination

CD-RW 5232IB 2 System Requirements For IBM compatible PCs, the system requirements recommended are as follows: ♦ Pentium II 350MHz above with at

CD-RW 5232IB 3INSTALLATION Host Interface Connections Most current motherboards have two IDE ports (primary and secondary) which can connect

CD-RW 5232IB 4 Hardware Installation 1. Turn off the power to the computer system. 2. Disconnect the power cord and all cables from the back of

CD-RW 5232IB 5 6. Connect the USB cable at the back of the drive to the USB header on the computer’s motherboard. The red wire of the cable